(DCNX7K) Configuring Cisco Nexus 7000 Switches Training

7254 Learners

DCNX7K Configuring Cisco Nexus 7000 Switches Training aims to impart enlightenment on the installation and implementation of the Cisco Nexus 7000 Series Switches. Moreover, the candidates would get the chance to meet the industry expert trainers, who will make their encounter with the techniques of how to configure, manage, and troubleshoot the Cisco Nexus 7000 Series Switch platform.

Furthermore, after completing the DCNX7K Configuring Cisco Nexus 7000 Switches Training, the candidates would:

  • Develop an understanding of Cisco Nexus 7000 Switch and how to manage this as well.
  • About the additional functionality and features including: FCoE, FabricPath, OTV, MPLS and security
  • What is the configuration of the Nexus 7000 switch security and Quality of Service features?
  • Develop an understanding of Troubleshooting key features of Cisco Nexus 7000 Switch
  • What are Nexus switch management tools?
Target audience
  • Systems Engineer
  • Field Engineers
  • The IT professionals, who have to implement as well as install Cisco Nexus 7000 Series Switches
Prerequisites

The prerequisite for the DCNX7K Configuring Cisco Nexus 7000 Switches Training:

  • An understanding of networking protocols, routing, and switching
  • CCNA Certification, Implementing Cisco IP Routing v2.0 (ROUTE), Implementing Cisco IP Switched Networks v2.0 (SWITCH) is a must.

DCNX7K Configuring Cisco Nexus 7000 Switches Training aims to impart enlightenment on the installation and implementation of the Cisco Nexus 7000 Series Switches. Moreover, the candidates would get the chance to meet the industry expert trainers, who will make their encounter with the techniques of how to configure, manage, and troubleshoot the Cisco Nexus 7000 Series Switch platform.

Furthermore, after completing the DCNX7K Configuring Cisco Nexus 7000 Switches Training, the candidates would:

  • Develop an understanding of Cisco Nexus 7000 Switch and how to manage this as well.
  • About the additional functionality and features including: FCoE, FabricPath, OTV, MPLS and security
  • What is the configuration of the Nexus 7000 switch security and Quality of Service features?
  • Develop an understanding of Troubleshooting key features of Cisco Nexus 7000 Switch
  • What are Nexus switch management tools?
Target audience
  • Systems Engineer
  • Field Engineers
  • The IT professionals, who have to implement as well as install Cisco Nexus 7000 Series Switches
Prerequisites

The prerequisite for the DCNX7K Configuring Cisco Nexus 7000 Switches Training:

  • An understanding of networking protocols, routing, and switching
  • CCNA Certification, Implementing Cisco IP Routing v2.0 (ROUTE), Implementing Cisco IP Switched Networks v2.0 (SWITCH) is a must.

(DCNX7K) Configuring Cisco Nexus 7000 Switches Training Course Content

Module 1: Cisco Nexus 7000 Series Switches

  • Cisco unified fabric trends
  • Nexus 7000 series switch
  • Deployment models

Module 2: Cisco Nexus 7000 Series Switch Hardware

  • Nexus 7000 series switch chassis family
  • Chassis components
  • I/O module families
  • Nexus 7000 and 7700 I/O module scalability
  • Network analysis module
  • High-availability features
  • Packet flow and arbitration
  • Layer 2 and Layer 3 forwarding

Module 3: Cisco Nexus 2000 Series Fabric Extender

  • Cisco FEX technology
  • Fabric extender models
  • 7000 series switch and 2000 series switch fabric extender topologies and features

Module 4: Cisco NX-OS Software

  • NX-OS software architecture and key features
  • NX-OS high-availability infrastructure components
  • IOS to NX-OS conversion tool
  • Licensing for Nexus 7000 series

Module 5: Cisco Nexus 7000 Series Switch Administration, Management and Troubleshooting

  • CLI and GUI management interfaces
  • NX-OS setup utility
  • NX-OS user management
  • AAA configuration with RADIUS, TACACS+, and LDAP
  • System management features
  • Cisco Fabric services
  • ISSU
  • NX-OS image recovery
  • EPLD image upgrade
  • Troubleshooting process
  • Configure online diagnostics
  • OBFL feature
  • Configure RMON and Cisco EEM
  • Evaluate memory
  • Troubleshoot packet flow issues
  • Cisco network analysis module

Module 6: Virtual Device Contexts (VDC) on Cisco Nexus 7000 Series Switches

  • VDC communication
  • VDC types, resources and management
  • Configuring and verifying VDCs
  • Managing VDC configurations

Module 7: Layer 2 Switching Features on Cisco nexus 7000 Series Switches

  • Basic interface parameters configuration
  • FEX layer 2 and 3 interfaces configuration
  • VLAN configuration
  • STP configuration
  • Q-in-Q VLAN tunnels configuration

Module 8: Port Channels and Virtual Port Channels on Cisco Nexus 7000 Series Switches

  • Port channel operation
  • Port channel load balancing
  • vPC
  • Concepts
  • Benefits
  • Architecture
  • Control and data plane operation
  • Peer link failure
  • Peer switch
  • Layer 3 interactions
  • Multicast
  • Configure and verify
  • Optimize
  • Troubleshooting checklist

Module 9: Cisco FabricPath on Cisco Nexus 7000 Series Switches

  • FabricPath
  • Architecture
  • MAC address learning
  • Data plane operation
  • Spanning Tree interaction
  • IP multicast routing
  • FabricPath con Nexus 7000 series switches configuration
  • Troubleshooting
  • FabricPath pong
  • DFA architecture and features
  • Fabric management
  • DFA deployment requirements
  • Prime DCNM 7.0 and DFA

Module 10: Layer 3 Switching Features on Cisco Nexus 7000 Series Switches

  • Cisco NX-OS routing and forwarding
  • Routing protocol configuration
  • Static route
  • OSPF
  • EIGRP
  • IS-IS
  • BGP
  • Route policy manager
  • FHRP protocol configurations
  • HSRP
  • VRRP
  • GLBP
  • BFD configuration on Nexus 7000 switches
  • Multicast configuration

Module 11: MPLS on Cisco Nexus 7000 Series Switches

  • Layer 2 and 3 VPN
  • Traffic engineering
  • MPLS feature set configuration
  • Layer 3 VPNs configuration
  • Layer 2 VPNs configuration
  • MPLS TE configuration

Module 12: Cisco OTV on Cisco Nexus 7000 Series Switches

  • Cisco OTV
  • Terminology
  • Control plane
  • Data plane
  • Unicast-only transport infrastructure
  • Data plane encapsulation
  • Spanning tree
  • Unknown unicast
  • QOS
  • Fast convergence
  • OTV verification and configuration
  • Advanced OTV features

Module 13: VXLAN on Cisco Nexus 7000 Series Switches

  • Data center overlay technologies
  • VXLAN
  • Data plane learning and packet flow
  • MP-BGP EVPN control plane
  • MP-BGP EVPN gateway functions
  • VXLAN configuration verification

Module 14: LISP on Cisco Nexus 7000 Series Switches

  • LISP
  • Features
  • Configuration steps
  • Infrastructure
  • Site devices
  • Internetworking devices
  • VM mobility

Module 15: FCoE on Cisco Nexus 7000 Series Switches

  • Fiber Channel over Ethernet (FCoE)
  • Requirements
  • Address scheme
  • Initialization protocol
  • Port types
  • Design
  • Supported FCoE ports
  • Configuration steps
  • Licensing
  • Enable FCoE
  • Multihop FCoE configuration

Module 16: Security Features on Cisco Nexus 7000 Series Switches

  • Security features
  • Configurations
  • ACLs
  • Port security
  • DHCP snooping
  • DAI
  • IP source guard
  • uRPF
  • Traffic storm control
  • CoPP
  • Cisco TrustSec configuration

Module 17: QoS on Cisco Nexus 7000 Series Switches

  • Diversity of data center application flows
  • Data center QoS requirements
  • Priority flow control
  • Priority-based bandwidth management
  • DCBX protocol
  • QOS on Nexus 7000 configuration

Module 18: Cisco ITD and RISE on Cisco Nexus 7000 Series Switches

  • ITD deployment models
  • ITD configuration and verification
  • RISE overview
  • With Citrix NetScaler appliances
  • With Cisco Prim e NAM

Module 19: Cisco NX-API and Python on Cisco Nexus 7000 Series Switche

  • Network programmability
  • NX-API overview
  • Python extensions and scripting

Drop Us a Query

+91 95550 06479

Available 24x7 for your queries

(DCNX7K) Configuring Cisco Nexus 7000 Switches Corporate Training & Certification Program

Employee training and development programs are essential to the success of businesses worldwide. With our best-in-class corporate trainings you can enhance employee productivity and increase efficiency of your organization. Created by global subject matter experts, we offer highest quality content that are tailored to match your company’s learning goals and budget.

Learn from the experts

Customized Training

Be it schedule, duration or course material, you can entirely customize the trainings depending on the learning requirements of your workforce. You can even choose a trainer from our team of certified industry experts.

Learn from the experts

Expert Mentors

Get trained from our team of highly skilled and certified trainers, who are officially accredited professionals with relevant industry experience and adept in providing the knowledge and skills required to be successful.

Learn from the experts

360º Learning Solution

Engage your employees with our all-inclusive learning platform. Avail benefits of 24/7 access to the learning management system, industry-certified mentors, assessments & mock tests, real-time learning and more.

Learn from the experts

Learning Assessment

Check test score and performance with our skills analysis tools. Our detail scoreboard displays scores, areas of strength, detailed answer of questions and more for each employee.

Download Corporate Brochure

+91 9555006479

Available 24x7